home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Club 1
/
Club Software (Micro Star) (1996).iso
/
install.dat
< prev
next >
Wrap
Text File
|
1996-01-30
|
7KB
|
185 lines
@DefineProject
@Name = "Micro Star CDRom Club"
@Version = "1.0a"
@Immediate = 1
@Subdir = "\\MSCLUB\\MS227"
@OutDrive = C
@EndProject
@Display
@Cls
M I C R O S T A R S O F T W A R E
CD-ROM CLUB
@Pause
@EndDisplay
@Display
@Cls
This program will install @Name
on your computer system. You may press the [Esc] key
at any time to abort the installation.
The installer will ask you several questions about your
computer. Each question has a default answer. If the
default answer is correct, press the ENTER key in response
to the question. Otherwise, type the answer and then press
the ENTER key.
If you make a mistake while typing, press the BACKSPACE key
and then retype the answer.
@Pause
@EndDisplay
@Display
@Cls
At the end of this installation, we will offer to re-start
Windows. If you have any programs running, you should save
your work before continuing. Now would be a good time to
exit from the installation and save your work, then re-start
this installation process.
(This only applies to installation of the Windows programs.)
@Pause
@EndDisplay
@Display
@Cls
If your computer uses TABWORKS (which replaces the standard
Windows Program Manager) you should probably EXIT the
installation now and review the file TABWORKS.TXT which is
on the CDRom.
@Pause
@EndDisplay
@Display
@Cls
To run the DOS programs, change to your CD-ROM drive
(example D:) and enter MENU. If you have trouble runnning
a program from the menu, additional information is in the
README.TXT file on the CD-ROM. You can view this file by
entering SHOWFILE README.TXT at the DOS prompt for your
CD-ROM drive (example "D:\").
To read the program documentation from the menu, exit the
menu and enter "READ" (without the quotes) at the DOS prompt
for the CD-ROM. This will start the menu without the special
utility in memory. When you have finished reading the
documentation, exit the menu and it will re-start with the
ability to run the programs from the CD-ROM.
@Pause
@EndDisplay
@Display
@Cls
Micro Star Technical Support is available from 8:00 am to
4:30 pm Pacific time. The number is (619) 931-4949.
@Pause
@EndDisplay
@Display
@Cls
Please Note, The SOURCE directory name for Music Tutor
will be needed in order to install Music Tutor
onto your Hard Disk. You will need to replace the A:\
with X:\MTWIN13.
where X: is the drive letter your CDRom drive.
@Pause
@EndDisplay
@Display
@Cls
Please Note, There are BOTH Windows3.1 AND Windows95
Programs on this CD. Windows95 Programs REQUIRE
Windows95 to run.
@Pause
@EndDisplay
@DefineDisk
@Label = "Disk #1"
@File \special\updat_cd.com @NoOverWrite @Out @WinDrive:\@WinDir\*.*
@File winstart.bat @NoOverWrite @Out @WinDrive:\@WinDir\*.*
@EndDisk
@DefineVars
/* Family Club */
/* Sample: @Qstring @A1 = "[AddItem(@StartupDrive:\\PRESWIND\\PRES.EXE, Presidents)]" */
@Qstring @A1 = "[AddItem(@StartUpDrive:\\CV302\\INSTALL.EXE, Convert It!)]"
@Qstring @B1 = "[AddItem(@StartUpDrive:\\ISSUE\\INSTALL.EXE, Issue Manager)]"
@Qstring @C1 = "[AddItem(@StartUpDrive:\\TCF200\\TREECHRT.EXE, Tree Chart)]"
@Qstring @D1 = "[AddItem(@StartUpDrive:\\TMCALC11\\TIMECALC.EXE, TimeCalcPro)]"
@Qstring @E1 = "[AddItem(@StartUpDrive:\\TRAKW411\\POSITRAK.EXE, Posi-Track)]"
/* End Business Programs */
@Qstring @F1 = "[AddItem(@StartUpDrive:\\KREADERW\\INSTALL.EXE, Kanji Reader)]"
@Qstring @G1 = "[AddItem(@StartUpDrive:\\PWDRAW\\INSTALL.EXE, PwDraw)]"
@Qstring @H1 = "[AddItem(@StartUpDrive:\\SKYMP21A\\INSTALL.EXE, SkyMap)]"
@Qstring @I1 = "[AddItem(@StartUpDrive:\\TELLTIME\\SETUP.EXE, Tell Time)]"
@Qstring @J1 = "[AddItem(@StartUpDrive:\\TUPPY100\\TUPPY.EXE, Tuppy)]"
/* End Family programs */
@Qstring @K1 = "[AddItem(@StartUpDrive:\\HS21\\HS.EXE, Home Stretch)]"
@Qstring @L1 = "[AddItem(@StartUpDrive:\\MOONBALL\\LUNARBBL.EXE, MoonBall)]"
@Qstring @M1 = "[AddItem(@StartUpDrive:\\TANK\\TANK.EXE, Tank)]"
/* End Games programs */
@Qstring @N1 = "[AddItem(@StartUpDrive:\\KIDPROOF\\SETUP.EXE, Kid Proof)]"
@Qstring @O1 = "[AddItem(@StartUpDrive:\\LAUNCHPD\\LAUNCHPD.EXE, LaunchPad)]"
@Qstring @P1 = "[AddItem(@StartUpDrive:\\POWERWIN\\POWERWIN.EXE, Power Windows)]"
@Qstring @Q1 = "[AddItem(@StartUpDrive:\\PROMPTER\\PROMPTER.EXE, Prompter)]"
/* End General programs */
@Qstring @R1 = "[AddItem(@StartUpDrive:\\APG_DD95\\DAVEDUDE.EXE, Dave Dude)]"
@Qstring @S1 = "[AddItem(@StartUpDrive:\\MTWIN13\\SETUP.EXE, Musical Tutor)]"
@Qstring @T1 = "[AddItem(@StartUpDrive:\\NUMBER10\\SETUP.EXE, Talking Numbers)]"
@Qstring @U1 = "[AddItem(@StartUpDrive:\\WDTX21\\SETUP.EXE, WordTrix)]"
/* End CD ONLY Stuff */
@Qstring @V1 = "[AddItem(@StartUpDrive:\\95\\SETUP.EXE, Power Utils)]"
@Qstring @W1 = "[AddItem(@StartUpDrive:\\CD95V50A\\SETUP.EXE, CD Player)]"
@Qstring @X1 = "[AddItem(@StartUpDrive:\\CURSORS\\INSTALL.EXE, Cursors)]"
@Qstring @Y1 = "[AddItem(@StartUpDrive:\\PFE0602I\\INSTALL.EXE, Editor)]"
@Qstring @Z1 = "[AddItem(@StartUpDrive:\\POLYV218\\INSTALL.EXE, PolyView)]"
@Qstring @A2 = "[AddItem(@StartUpDrive:\\SMI95V13\\INSTALL.EXE, SmilerShell)]"
@Qstring @B2 = "[AddItem(@StartUpDrive:\\SNAP251\\INSTALL.EXE, SnapView)]"
@Qstring @C2 = "[AddItem(@StartUpDrive:\\TBW95651\\SETUP.EXE, ThunderByte Anti-Virus)]"
/* End Windows95 programs */
@EndVars
@ProgramManager("[CreateGroup(Windows95 Only Programs, @WinDrive:@WinDir\\club##2.grp)] @V1 @W1 @X1 @Y1 @Z1 @A2 @B2 @C2")
@ProgramManager("[CreateGroup(CDRom Club, @WinDrive:@WinDir\\club##1.grp)] @A1 @B1 @C1 @D1 @E1 @F1")
@ProgramManager("[CreateGroup(CDRom Club, @WinDrive:@WinDir\\club##1.grp)] @G1 @H1 @I1 @J1 @K1 @L1")
@ProgramManager("[CreateGroup(CDRom Club, @WinDrive:@WinDir\\club##1.grp)] @M1 @N1 @O1 @P1 @Q1")
@ProgramManager("[CreateGroup(CDRom Club, @WinDrive:@WinDir\\club##1.grp)] @R1 @S1 @T1 @U1")
@Finish
@ChDrive @OutDrive
@ChDir "@SubDir"
Installation of @Name is now finished.
If you have installed the Windows programs, Windows
needs to be re-started before the programs can be
run directly from the CD-ROM.
If you have any Windows programs running now, Exit
choose "Cancel" at this screen, and save your work,
then Exit and re-start Windows.
If you want Windows to re-start now, press ENTER or
click on "OK."
@Pause
@WinExitExec(" ")
@EndFinish
/* end-of-file */